Modern residential complex construction
B2B HVAC ENGINEERING FOR BUILDERS AND INVESTORS

Air conditioning for new sites

Design, delivery and installation of air conditioning systems already at the construction stage.

Complete HVAC solutions for residential complexes, apartments, hotels, villas and commercial properties.

Design Selection Delivery Installation Commissioning Service
23+
Years of proven HVAC experience
20,000+
Completed installations and systems
SITES
From individual buildings to large complexes
1 PARTNER
Design → Delivery → Installation → Service
Construction integration

AIR CONDITIONING MUST BE PLANNED ON TIME.

Embedding the air conditioning installations in the right construction phase saves tens of thousands of leva in rework, facade compromises and delays to the Act 15/16 deadlines.

Construction schedule and HVAC coordination
01
Architectural design
02
HVAC installations
Key stage
03
Rough construction
Route laying
04
Finishing works
05
Furnishing
06
Completed site
✓

PROPER PLANNING WITH NESSEBAR KLIMA

  • ✓Hidden routes: the piping and condensate are laid into the screeds and shafts without visible cable channels.
  • ✓Precise sizing: capacity based on room volume and heat loss, without energy waste.
  • ✓Organised drainage: gravity discharge with no risk of dripping facades and damaged plaster.
  • ✓Prepared power supply: correct cable cross-sections and breakers in the main panel.
  • ✓Clean installation: indoor units are mounted after the clean construction activities.
  • ✓Predictable budget: fixed delivery and installation prices without unexpected adjustments.
✕

LATE PLANNING AND ITS CONSEQUENCES

  • ✕Chasing finished walls: destruction of already completed plaster, insulation and paint.
  • ✕Additional costs: paying for repeated construction and repair work to restore the site.
  • ✕Visible external services: aesthetic PVC channels and pipes hanging loose on the facade.
  • ✕Architectural limitations: impossibility to install the optimal type of indoor unit.
  • ✕Deadline delays: halting of final finishing works due to routing.
  • ✕Energy efficiency compromises: overloading of the building general electrical grid.
Engineering workflow

ONE PARTNER FOR THE ENTIRE AIR CONDITIONING SYSTEM

We organise the technical provision step by step with strict supervision over the project requirements and coordination with the construction schedule.

01

Project Analysis

Familiarization with architectural plans, thermal insulation layers, facade geometry, and customer requirements.

02

Measurement and Heat Loss

Precise engineering calculations of volumes, orientation, heat gains, and thermodynamic coefficients for each room.

03

System Selection

Determining the exact technology: centralized VRF/VRV systems, multi-split systems, or high-efficiency heat pumps.

04

Detailed Design

Coordinating precise cable, pipe, and gravity drainage routes with structural engineers, electrical engineers, and plumbers.

05

Equipment Delivery

Direct logistics from the warehouses of official suppliers (Daikin, Mitsubishi, Gree) synchronized with the construction schedule.

06

Site Preparation

Laying routes, seamless copper pipes with Armaflex insulation, and automation during the rough construction phase before screeds.

07

Specialized Installation

Installation of outdoor units, convectors, channel bodies, linear diffusers, and BMS controllers by experienced certified technicians.

08

Commissioning and Setup

Deep vacuum, high-pressure nitrogen tests, flow meter calibration, and programming of intelligent management.

09

Warranty Service

Continuous regional technical support, seasonal maintenance, and full stock of original spare parts on-site.

System solutions

A SOLUTION FOR EVERY SITE

We select the technology according to the purpose of the building, the architectural design and the energy efficiency requirements.

SPLIT / MULTISPLIT
Individual zones

SPLIT / MULTISPLIT

For apartments, single-family houses and smaller standalone sites. One outdoor unit serves up to 5 independent indoor units.

  • ✓ Low operating costs
  • ✓ Flexible phased installation
  • ✓ Class A+++ seasonal efficiency
VRF / VRV SYSTEMS
Building scale

VRF / VRV SYSTEMS

For residential complexes, hotels, office centres and large buildings. Simultaneous heating and cooling with long piping runs up to 1000 m.

  • ✓ Centralised microprocessor control
  • ✓ Modular expansion principle
  • ✓ Accurate energy consumption metering
DUCTED SYSTEMS
Architectural aesthetics

DUCTED SYSTEMS

For maximum architectural cleanliness and concealed installation in suspended ceilings. Only designer linear air grilles remain visible.

  • ✓ 100% discreteness in the interior
  • ✓ Even air distribution
  • ✓ Minimal noise level
HEAT PUMPS
RES & Energy efficiency

HEAT PUMPS

Heating, cooling and year-round domestic hot water (DHW). Integration with water underfloor heating and fan coils for the next generation of buildings.

  • ✓ Up to 75% energy drawn from the environment
  • ✓ Full replacement of conventional radiators
  • ✓ High COP coefficient up to 5.1
Engineering dossier & Experience

COMPLETED PROJECTS

Real experience is the best proof of our capabilities. Every building brings its own specific engineering challenges.

Site type:
Technology solution:
Panorama Bay complexResidential complex
Sveti VlasVRF system

Panorama Bay complex

64Apartments
148Indoor units
380 kWPower

Design • Delivery • Piping routes at rough build • Commissioning

Historia Marina hotel4* hotel
Sunny Beach3-pipe VRF with heat recovery

Historia Marina hotel

112Hotel rooms
14Outdoor units
620 kWTotal capacity

Complete engineering • Central building management (BMS) • Simultaneous heating/cooling

Acropolis sea residenceResidence / Villa
Nessebar - Old TownHeat pump + Underfloor

Acropolis sea residence

540 m²Total floor area
32 kWAir-to-water
500 LDHW boiler

Underfloor heating • Built-in floor convectors • Precise quiet air conditioning

Sunset Crest complexApartment complex
PomorieConcealed ducted installation

Sunset Crest complex

38Apartments
84Indoor units
210 kWCapacity

Linear diffusers in the interior • Facade niches for the outdoor units

Port View business centreShopping centre
BurgasVRF + Ventilation

Port View business centre

3 200 m²Area
420 kWTotal capacity
18 000 m³/hFresh air volumes

Rooftop installation of chiller units • Zoning of offices and retail ground floor

Olympia residenceResidential building
RevdaIndividual multisplits

Olympia residence

24Apartments
24Outdoor units
68Air conditioners

Hidden piping routes during masonry • Preserving the clean look of the balconies

Selected project Marina ViewSelected engineering project
Large-scale first-line project

Residential and holiday complex "Marina View Residences"

Complete construction of the HVAC installation at the rough build stage. The project required imperceptible positioning of the outdoor units without disrupting the Mediterranean architectural silhouette and a complete guarantee of zero noise for the owners.

LocationSveti Vlas, Nessebar Bay
Site typeResidential complex with 4 buildings
TechnologyVRF system with individual metering
Scale128 apartments • 340 indoor units
ScopeDesign • Delivery • Installation • 24/7 service
Building categories

SPECIALISED EXPERIENCE FOR EVERY TYPE OF STRUCTURE

Each category of construction site has different technical standards for air exchange, noise and energy consumption.

Professional advantages

WHY NESSEBAR KLIMA

We prove our competence not with slogans, but with real engineering responsibilities on the construction site.

Real field experience

Hundreds of completed sites along the coast and across the country. We know the specifics of the marine climate, the corrosive environment and seasonal peak loads.

Integrated engineering approach

From the thermographic analysis and project drawings to primary routes, commissioning and warranty service.

Professional installation

Execution according to the structural requirements of the building with high-grade copper pipes, reliable insulation and brazed joints under nitrogen shielding.

Precise sizing

Neither oversized expensive equipment nor a shortage of cooling capacity on the hottest days. Balanced systems with maximum COP/EER.

Leading global brands

Official partnership with approved HVAC equipment manufacturers with guaranteed origin and direct factory warranties.

Service and maintenance

Own service teams, mobile units and stock of original spare parts at our warehouse base in the region.

B2B partnership

HOW WE WORK WITH INVESTORS AND CONSTRUCTION COMPANIES

A clear linear protocol, synchronised with the construction stages and the investment budget.

STAGE 01

You send the project

You provide the architectural layouts (DWG/PDF), cross-sections and specifications of the site.

STAGE 02

We analyse the site

Our engineering department calculates the heat losses and the specific structural requirements.

STAGE 03

We develop an HVAC concept

We propose an optimal selection of systems (VRF, split, ducted or heat pumps).

STAGE 04

We prepare the quote

We produce a detailed bill of quantities (BOQ) with firm fixed prices for equipment and labour.

STAGE 05

We agree the deadlines

We integrate the installation schedules for piping routes before the screeds of the building are poured.

STAGE 06

We carry out the installation

Laying of routes, drainage, power supply and installation of indoor and outdoor units.

STAGE 07

We commission the system

Evacuation, pressure tests, automation tuning and parameter setting.

STAGE 08

We hand over the site

Handover with as-built documentation, test protocols and staff briefing.

STAGE 09

We stay in service

We take on full warranty and post-warranty care for the building as a local partner.

"One responsible partner for the air conditioning of the entire site — without blurring responsibility between designer, supplier and installer."

START WITH A CONSULTATION
WE WORK WITH PROVEN GLOBAL HVAC MANUFACTURERS
DAIKINMITSUBISHI ELECTRICGREETOSHIBAPANASONICFUJITSU GENERAL
Project engineering quote

DO YOU HAVE A NEW PROJECT?

Send us the architectural plans and layouts. Our engineering team will analyse the volumes and prepare a justified technical solution and bill of quantities for the air conditioning of the building.

✓
Analysis within 48 hours: You receive an initial technical position and system guidance.
✓
Optimisation of the investment: We select equipment that meets the design standards without unnecessary markup.
✓
Synchronisation with the construction programme: Our engineers coordinate the routes directly with your technical manager.
Project quote request
Fill in the site details and attach the architectural drawings (DWG, PDF, ZIP).
Click to select drawings or drop them here
Formats: PDF, DWG, DXF, ZIP, RAR
Your project will be reviewed personally by a lead HVAC engineer. Confidentiality is guaranteed.
Building architecture

PLAN THE AIR CONDITIONING RIGHT FROM THE START.

A better project. A cleaner installation. Fewer unforeseen costs during construction.

GET A PROJECT QUOTE